![MikroTik](/img/default-banner.jpg)
- Видео 1 716
- Просмотров 15 128 657
MikroTik
Латвия
Добавлен 11 апр 2012
MikroTik: making awesome networking equipment, routers, wireless access points, 5G devices and more!
Simple tips to improve WiFi range
Small details that can make a difference with our WiFi6 (ax) products.
Просмотров: 4 406
Видео
Your first WiFi configuration
Просмотров 4,9 тыс.19 часов назад
How to set up your first Mikrotik wireless access point with no prior knowledge. Let Deniss guide you through step by step.
ROSE: SMB shares
Просмотров 5 тыс.14 дней назад
With the addition of the ROSE package SMB in RouterOS has received a fresh start. help.mikrotik.com/docs/display/ROS/SMB help.mikrotik.com/docs/display/ROS/ROSE-storage#ROSEstorage-SMB
ROSE: storage encryption
Просмотров 4,6 тыс.14 дней назад
Encrypt your storage with the ROSE package! Both software and hardware encryption is possible. help.mikrotik.com/docs/display/ROS/ROSE-storage 0:00 software or hardware 0:32 self-encrypting drive setup 1:36 disable hardware encryption 1:43 software encryption setup
Spiders and dinosaurs IN MY SERVER ROOM?! (Spotted In The Wild #9)
Просмотров 6 тыс.21 день назад
Send us your MikroTik setups (marketing@mikrotik.com) - and get a 10 EUR coupon code in our merch store! Submissions in this video will receive the coupons over this weekend.
MikroTik reacts to your comments: summer edition
Просмотров 6 тыс.Месяц назад
Thank you for all the comments, we try our best to read them all, so please keep at it!
ROSE: Advanced storage in RouterOS
Просмотров 7 тыс.Месяц назад
The MikroTik ROSE (RouterOS Enterprise) package adds data center functionality to RouterOS - for supporting disk monitoring, improved formatting, RAID, rsync, iSCSI ,NVMe over TCP, NFS. This functionality currently is supported on arm, arm64, x86 and tile platforms. This vide is part one in the series. More info about ROSE: help.mikrotik.com/docs/display/ROS/ROSE-storage More info about MikroTi...
Master time with RouterOS Scheduler
Просмотров 5 тыс.Месяц назад
Your router is already keeping time, why would it not keep a schedule as well? Tell it what to do, when to do it and how often. help.mikrotik.com/docs/display/ROS/Scheduler
MikroTik Newsletter July: what's in it?
Просмотров 7 тыс.Месяц назад
The news PDF: mt.lv/news119 Previous newsletters: help.mikrotik.com/docs/pages/viewrecentblogposts.action?key=ROS
Import CA Root certificate and access HTTPS content
Просмотров 6 тыс.Месяц назад
We have done videos about SSL/TLS certificates before, but what if you want your router to access HTTPS content safely? DoH, adlist and fetch can all make use of certificates available on the device. 0:00 Intro 0:50 How https authentication works on the web 3:19 Chain of Trust 4:25 Import the Certificate for adlist 5:01 fetch example 5:49 Outro
Why Pi-hole when you can RouterOS adlist?
Просмотров 16 тыс.Месяц назад
RouterOS DNS server now has a new feature - adlist. Introduced in version 7.15 it takes URL lists and blocks unwanted web content. help.mikrotik.com/docs/display/ROS/DNS#DNS-Adlist
One-step DLNA media server setup
Просмотров 12 тыс.2 месяца назад
With RouterOS, you can share your media almost instantly. All you need is a storage drive with your files and a single line of configuration. help.mikrotik.com/docs/pages/viewpage.action?pageId=237699479
CRS320-8P-8B-4S+RM: our first PoE++ superswitch!
Просмотров 11 тыс.2 месяца назад
The first MikroTik high-power PoE (802.bt) switch - for easy and cost-effective powering of 4K security cameras, ad panel screens, or even industrial automation systems. Forget about countless power cables - create a cleaner space with PoE ! mikrotik.com/product/crs320_8p_8b_4s_rm#fndtn-specifications
CRS520-4XS-16XQ-RM: 100 Gigabit switch of the YEAR?
Просмотров 18 тыс.2 месяца назад
An ultra-fast enterprise switch with extra processing power due to the CCR series CPU & the best price per 100 Gigabit port on the market! mikrotik.com/product/crs520_4xs_16xq_rm#fndtn-specifications
Scripting: working with Arrays
Просмотров 5 тыс.2 месяца назад
After learning about all the data types, we have a closer look at RouterOS arrays and all their nooks and crannies. help.mikrotik.com/docs/display/ROS/Scripting#Scripting-OperationswithArrays 0:00 concatenation 1:00 index and key 2:31 print as-value 3:15 foreach loop 3:45 get command 4:07 arrays in arrays 5:39 toarray command
The Student and The Master (Spotted In The Wild #8)
Просмотров 4,4 тыс.2 месяца назад
The Student and The Master (Spotted In The Wild #8)
The valuable information in the Test Results
Просмотров 5 тыс.2 месяца назад
The valuable information in the Test Results
Netinstall CLI - Linux версія - покроково
Просмотров 2,5 тыс.3 месяца назад
Netinstall CLI - Linux версія - покроково
MikroTik Train-The-Trainer: routers used by experts?
Просмотров 6 тыс.3 месяца назад
MikroTik Train-The-Trainer: routers used by experts?
NetMetal ax - extra tough outdoor Wi-Fi 6 access point!
Просмотров 15 тыс.3 месяца назад
NetMetal ax - extra tough outdoor Wi-Fi 6 access point!
MikroTik product news: the D.I.Y. L23 RouterBOARD
Просмотров 20 тыс.3 месяца назад
MikroTik product news: the D.I.Y. L23 RouterBOARD
Connect to your first Mikrotik - all of the ways listed
Просмотров 9 тыс.4 месяца назад
Connect to your first Mikrotik - all of the ways listed
Rodriguez Linda Johnson Gary Young Larry
Thanks
Would you care to address double NAT controversy. Home users often end up with double NAT due to misconfiguration and added network devices with different impacts on their internet experience, often braking specific protocols.
It's just ridiculous that the Chateau (original version) only has 16MB storage space and I just cannot add another packages like the ROSE because of the insufficient storage.
Ive mounted SMB share for testing media server inside mikrotik, but when i try to stop or remove mouted share i get error (6) device still in use . Meda server already switched off and removed , but still cant remove share from files. Any suggestions?
Why isn't "New Zealand" available as a country using the reg-info command? In fact under the interface there are 13 countries starting with N but under that command there are only 7.
what mean "0" in your command ? the interface number ? I have tried 0 ,1 but nothing.About mikrotik wi-fi , is ok only for a cheap usecase.If you have 30 an more client, and you need for wi-fi roaming ( 802.11 rkv ) or the density of clients is high - mikrotik isn't so good sollution.You need something like Unifi,Aruba and other vendors who have MU-MIMO 2x2 or 4x4.
Roaming is supported as well as many clients. If you need help with optimizing your setup configuration, we have a helpful forum
[admin@MikroTik] > interface/wifi/radio/reg-info country=Australia 0 no such item Shit always works with mikrotik!
Oh hello miss Anta, i have a question about lte-modem firmware, can i update a firmware in lte-modem without inserted card (literally empty) in sim-slot? maybe ftp,tftp, because in my work we have a lot of new mikrotik lte wireless antenns to selling our clients, and they always forgot how to do it, and call back or bring antennas back, to me, without their sim-cards)). But my sim-card registred by me.
However, if you ping a network device that drop any ICMP Echo Request, you will be confused and start blaming NAT settings before started pulling your own hair
only 1 2.5port and its the poe out port too? Sad
How can make a certificate works with sstp client at mikrotik router
all soho wireless router mikrotik most use antenna gain under 5dBi. mikrotik should, make minimal for ideal antenna gain 5dBi.
One thing to also take note off (that a lot of people don't), is that you should set the 2.4GHz to be around 7dB *lower* than that of 5GHz. While not strictly necessary, a lot of client can be rather dumb and stick to 2.4GHz because it's significantly stronger than 5GHz (due to the dampening n such). Setting 2.4GHz to 7dB lower than 5GHz (eg. have 2.4GHz be 14dB and 5GHz on 21dB) makes them around equal strength (and clients should be more inclined to pick the 5GHz). Yes, it doesn't go with the whole "improve wifi range" aspect (since you lower the 2.4GHz band's range) but I'd rather have my clients be more inclined to move to 5GHz than maximize range.
That's good but I personally for homes, prefer to just create separate SSID's for each frequency band. Then choose at the device itself which band to connect. The 7dB thing is more for to encourage band steering but the downside is your now down 7dB on 2.4GHz. That extra 7dB on 2.4GHz can be very useful.
I don't know if AX3 has a front-end-module or not, but this is seriously bad wifi performance.
2.4ghz only has 3 clear channels (1,6,11) More than 3 devices will overlap channels on 2.4ghz. Cross channel interference. Use 5 ghz or 6 ghz to avoid cross channel interference
The SSID should be the same string on both bands to enable seamless roaming for the clients as you move around the property.
mikrotik not suport roaming , for that you need 802.11 rkv, for AP's and for user's too
This is ofc a more relevant comment for the upcoming additional AP video... but sometimes you may just need to run a wired connection past a barirrier and have an AP there. On the farm I ran a cat7 connection into the garage for this reason... even though I already have outdoor APs they just couldn't reliably penetrate with all the material in the garage... so wired connection into the garage and a separate AP... aaaaand done.
Number one overlooked thing that can easily improve some range is to mount the AP higher! Most attenuation is along the horizontal plane. Mount it higher means less attenuation, even on the same floor. Ideally mount it on the ceiling, or even in the attic if possible. If it's a two story home, have the AP on the second floor, in the center of the home.
Should they stand upside down?
I have on WapAC covering the entire house, mounted on the second floor more or less in the middle of the house. Covers three floors and the garden also sufficiently. After moving in I did have to make the effort running a cable to that location but it was worth it. I needed to run some other cables anyway hence the spot was wide open an it was a shame not to put a cable and socket in place. It aren't gigabit speeds, but more then enough for mobile devices including streaming video. The only cheat I had to make was using country 'korea republic' on my 5 GHz wireless because the Mikrotik DFS implementation clearly sucks.
@@feicodeboer Nice! Yes that cable run can be a hassle but once done, can pay off big time! One idea for others is to go buy a 100 ft CAT5E or CAT6A Ethernet cable and temporarily place the AP in potentially good locations and test. Then if/when you find a good spot, then run a permanent cable there for the AP to be there.
Q: 2:53 What does mean "dfs" in the "5490-5730/30/dfs"?
Google "WiFi DFS" :) enjoy
Dynamic Frequency Selection: However, it is use is broader than the name implies, it is used to avoid colliding with weather radar systems. en.wikipedia.org/wiki/Dynamic_frequency_selection
QuickSet still req pressing 2x APPLY button to not brick unit and not use a netinstall ?? The Wifi and QuickSet are the wore, most hatefull features in MikroTik devices. Please not create a next wifi-cp3-wireless-fp3 packages every year !.
I have at least 4 devices in customers networks who not work, cannot connect or not work stable with wifi from MikroTik, thats why we not use a MikroTiks wifi from 10years bcs those problems are still active. You change every few year packages of wifi.. this is not stable technology ever for your developers. The weak point. For all others, MikroTiks are perfect and I am pride of using Tshirt with your logo. I hipe you do a 48x10GbE copper switch, do stable wifi with kvr, and do HA/Stacking switches with many LACP.
Hello from Australia! I get a Snyax error for that command. Line 10. It seems to take issue with the first /. Using "Command ?" for help did not provide useful information. RouterOS v6.47.8 on a Hap AC Lite
He's using RouterOS v7. The commands are not directly compatible with v6
disconnected, connection lost, signal strength -35 disconnected, connection lost, signal strength -35 disconnected, connection lost, signal strength -35 disconnected, connection lost, signal strength -35 disconnected, connection lost, signal strength -35 disconnected, connection lost, signal strength -35
Is there something like reg-info for the wireless(wlan) interfaces?
The best way to improve wifi on mikrotik is sell it and get unify instead
Rule #1: You do not talk about Fight Club. Rule #2: You DO NOT talk about Fight Club!
That command does not seem to work on router OS 6.
Same. I got a syntax error with the first / in the sequence v6.47.8
I love Mikrotik but WiFi is not it's strongest area. Small travel router (ax) has much better range and stability in my appartment (compared to hap ac3). Not sure if it's ax vs ac. Already updated to new wifi driver with beam forming. Range is better not still not enough..
Actually, this video helped me choose a better/more powerful channel for 5G and my hAP ac3 now has better range than a small travel router. Thank you! :)
hAP AC3 has a 3dBi antenna gain for 2.4GHz and 5.5dBi for 5GHz. hAP AX2 has a 4dBI antenna gain for 2.4GHz but 4.5dBi for 5GHz. So the AX2 has better range (in theory) on 2.4GHz but worse on 5GHz. If you want more range, you will need bigger antennas (so would need to upgrade to a hAP AX3 or something). Make sure to check your local laws regarding your max EIRP (combination of TX power, cable loss and antenna gain) before just screwing on a bigger antenna.
Where's WiFi7 from Mikrotik? :(
Never )
When a WiFi 8 will be standard in Laptop wifi cards - this is a MikroTik wifi way.
Sometime around whenever native Mac and Linux support for WinBox comes
just don't wait wi-fi and don't use wi-fi mikrotik
@@user-vy4sf5fl3n excalty this is best way of using MikroTik as router (not as accesspoint) and then in every company all wifi works good. This is a corpo way, to not use a wifi who is not certyfied, a MikroTik is proof that wifi should be certyfied.
We need a new RB5009 router with wifi6/7 and an all-port 2.5Gbe configuration.
Knowing what Mikrotik is, in dreams)
OMG that would be cool, just those 2.5Gbe would be fantastic
Mikrotik is like a devil.. they will give you maybe one 2.5GB port and all wifi or 2.4wifi and all 2.5Gb ports.. never everything in one package
@@ussul6524 yes, you are right
And poe on all ports ;)
So are you saying that leaving my router inside of my metal made server rack isn't a good idea? I don't know how to process this information.
Yes, if you can't see it (Line of sight) the signal will be compromised
how to undo this? i can no longer delete the "ram" storage. when i tried to delete it from Files, it says permission denied (9)
You have to remove it from the disk section.
Do you have routers made in EU, Taiwan? Not in china.
Still dreaming and waiting impatiently for a RB5009 refresh with Wifi6/7 and all 2.5Gbe ports.
is the 5G R16 better than the 5G ax?
6 anos depois e essa apresentação ainda é muito relevante.
Can you tell me how the hek i can config a superchannel for this ax ? And why the hek i cant use all frequencies ??!!
Can you please product one of these RB5009's in a RB3011 style case (at least forward facing out front of rack). For small business with racks the rack brackets for these and slim profile are ugly/wonky looking.
can mikrotik gper use for this setup? 48v gigabit poe switch -->> 75meters cable-->> mikrotik gper-->>75meters cable-->>access point
It depends on many factors, but it could be done.
what's the requirements for this to work? i tried it, using a file instead of the URL, name count was recorded or fetched correctly but match count doesn't. even when i open a website with ads, its as if nothing is blocked.
Did you increase cache amount? And did you set ssl verify to No?
@@mikrotik yes. i even set my own file with 2 domains only. name count 2, but when i open the 2 domains, they're both accessible and not blocked
Why I should buy WiFi AP that capable to become a Router ?
Like address list we need Port list ,domain list, sub domain list, wild card list and keyword needed
Mikotik firewall need different blocking style in firewall like tld blocking, subdomain block,domain block,wild card blocking,easy keyword blocking with any character blocking and block ip address which does not have domain and these all blocking needed in your firewall
A few years ago I installed it via recovery mode and everything works fine. Now I tried it according to your video. And nothing works. The IP address is not registered automatically and there is no access to the droplet. The new access console from digitalocean does not work without installation.
I would like to add (after 3 hours of looking everywhere in my router and firewall config) that in order to reach the switch on the management ip from another network (routed), you need to add a default route for the management vlan interface in the switch. So 0.0.0.0/0 -> gateway of management network. Or use masquerade on the management vlan interface of the router to simulate being in the same network. The default route can be automatically added when using dhcp client for the assignment of the management ip, but not for statically assigned ones.
Hmm wonder if I could get homeassistant running on this ;)
How to print the last N records from log? Something equivalent to "tail -n 10 /var/syslog" (in this example N=10)
this videos are fantastic. Watched the FT one, Wifi6 capsman and now this. many customers can use this at a good price
no indoor version ?